new firmware 74R0 upnp + WPA

L'ADSL, Asymetric Digital Subscriber Line est en vogue mais n'est pas seul. Toutes vos questions relatives aux connexions internet, du 56k à la fibre optique, c'est ici !

Modérateur: Modérateurs

new firmware 74R0 upnp + WPA

Messagepar pupu » 11 Nov 2004 18:59

http://www.netopia.com/equipment/purcha ... _intl.html

33X1/33X7 = Latest Release 7.4 R0


http://www.netopia.com/equipment/upgrad ... /n74r0.bin



Terminal shell v1.0
Copyright ®2004 Netopia, Inc. All rights reserved.
Netopia Model 3347W Wireless DSL Ethernet Switch
Running Netopia SOC OS version 7.4.0 (build r0)
Multimode ADSL Capable
(Admin completed login: Full Read/Write access)

Netopia-3000/xxxxxxxx> config

Config Mode v1.3
Netopia-3000/xxxxxxxxx (top)>> set
top
atm
option (on) [ off | on ]:
vcc 1
option (on) [ off | on ]:
vpi (8) [ 0 - 255 ]:
vci (35) [ 0 - 65535 ]:
ppp-vcmux : PPP over ATM, VC-muxed
ppp-llc : PPP over ATM, LLC-SNAP
ether-llc : RFC-1483, bridged Ethernet, LLC-SNAP
ip-llc : RFC-1483, routed IP, LLC-SNAP
pppoe-vcmux : PPP over Ethernet, VC-muxed
pppoe-llc : PPP over Ethernet, LLC-SNAP

encap (pppoe-llc)
[ ppp-vcmux | ppp-llc | ether-llc
ip-llc | pppoe-vcmux | pppoe-llc ]:
pppoe-sessions (1) [ 1 - 1 ]:
qos
service-class (ubr) [ ubr | cbr | vbr ]:
peak-cell-rate (0) [ 0 - 3000 ]:
bridge
dsl vcc1
option (off) [ off | on ]:
dhcp
option (server) [ off | server | relay-agent ]:
start-address (192.168.1.33):
end-address (192.168.1.63):
lease-time (01:00:00:00):
dmt
type (multi) [ lite | dmt | ansi | multi ]:
autoConfig (off) [ off | on ]:
dns
proxy-enable (on) [ off | on ]:
domain-name (""):
primary-address (0.0.0.0):
secondary-address (0.0.0.0):
dslf-cpewan
option (off) [ off | on ]:
dslf-lanmgmt
option (off) [ off | on ]:
ip
option (on) [ on ]:
ethernet A
option (on) [ off | on ]:
address (192.168.1.1):
broadcast (192.168.1.255):
netmask (255.255.255.0):
restrictions (none) [ none | admin-disabled ]:
rip-send (v1) [ off | v1 | v2 | v1-compat | v2-md5 ]:
rip-receive (v1) [ off | v1 | v2 | v1-compat | v2-md5 ]:
ip-ppp vcc1
option (on) [ off | on ]:
address (0.0.0.0):
peer-address (0.0.0.0):
restrictions (admin-disabled) [ none | admin-disabled ]:
addr-mapping (on) [ off | on ]:
rip-receive (off) [ off | v1 | v2 | v1-compat | v2-md5 ]:
gateway
option (on) [ off | on ]:
interface (ppp-vcc1)
[ ip-address | ppp-vcc1 ]:
igmp-forwarding (off) [ off | on ]:
ipsec-passthrough (on) [ off | on ]:
prioritize (off) [ off | on ]:
sip-passthrough (on) [ off | on ]:
static-routes

(static-routes) node list ...
Select (destination-network) node to modify from list,
or enter new (destination-network) to create.
static-routes destination-network (?):
static-arp

(static-arp) node list ...
Select (ip-address) node to modify from list,
or enter new (ip-address) to create.
static-arp ip-address (?):


(static-arp) node list ...
Select (ip-address) node to modify from list,
or enter new (ip-address) to create.
static-arp ip-address (?):
ip-maps

(ip-maps) node list ...
Select (name) node to modify from list,
or enter new (name) to create.
ip-maps name (?):
nat-default
mode (off) [ off | default-server | ip-passthrough ]:
pinhole

(pinhole) node list ...
Select (name) node to modify from list,
or enter new (name) to create.
pinhole name (?):
ppp
module vcc1
option (on) [ off | on ]:
mru (1492) [ 128 - 1492 ]:
magic-number (on) [ off | on ]:
protocol-compression (off) [ off | on ]:
lcp-echo-requests (on) [ off | on ]:
failures-max (10) [ 1 - 20 ]:
configure-max (10) [ 1 - 20 ]:
terminate-max (2) [ 1 - 10 ]:
restart-timer (3) [ 1 - 30 ]:
connection-type (instant-on) [ instant-on | always-on ]:
time-out (1500) [ 30 - 3600 ]:
auto-connect (on) [ off | on ]:
port-authentication
option (chap-only) [ off | on | pap-only | chap-only ]:
username (""):
password (""):
radius
radius-name (""):
radius-secret (""):
alt-radius-name (""):
alt-radius-secret (""):
radius-port (1812) [ 0 - 65534 ]:
security
state-insp
udp-timeout (180) [ 30 - 65535 ]:


(xposed-addr) node list ...
Select (exposed-address#) node to modify from list,
or enter new (exposed-address#) to create.
xposed-addr exposed-address# (?):
servers
web-http (80) [ 0 - 65534 ]:
telnet-tcp (23) [ 0 - 65534 ]:
snmp
community
read ("public"):
write (""):
trap (""):
traps
ip-traps

(ip-traps) node list ...
Select (ip-traps) node to modify from list,
or enter new (ip-traps) to create.
ip-traps (?):
sysgroup
contact (""):
location (""):
v3
enable (off) [ off | on ]:
system
name ("Netopia-3000/xxxxxxxx"):
diagnostic-level (high) [ off | low | medium | high | alerts | failures ]:
heartbeat
option (off) [ off | on ]:
ntp
option (on) [ off | on ]:
server-address ("129.132.2.21"):
alt-server-address ("18.72.0.3"):
daylight-savings (off) [ off | on ]:
time-zone (1) [ -12 - 12 ]:
update-period (60) [ 1 - 65535 ]:
syslog
option (off) [ off | on ]:
upnp
option (on) [ off | on ]:
vlan
wireless-segmentation (off) [ off | on ]:
wireless
option (on) [ off | on ]:
ssid ("5511 4115"):
multi-ssid
option (off) [ off | on ]:
closed-system (off) [ off | on ]:
default-channel (7) [ 1 - 13 ]:
no-bridging (off) [ off | on ]:
privacy
option (off) [ off | WEP | WPA-PSK | WPA-802.1x ]:
mac-auth
option (off) [ off | on ]:




:wink:
pupu
 

Retourner vers Connexion (ADSL, Câble, Fibre optique, etc.)

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 0 invités